Baja BA 250 Owner's Manual download pdf (Page 56)

IDLE SPEED ADJUSTMENT

To adjust the idle speed properly, you need a tachometer. If you do not have

one, ask your authorized service center to perform this adjustment.

To adjust the idle speed:

1. Start the engine and warm it up.

2. Turn the throttle stop screw in or out so that the engine idle speed is at

1400~1600r/min.

FUEL HOSE

WARNING

Improper adjustment of the idle speed could be hazardous.

An idle speed that is too high could cause the ATV to launch forward when

you start the engine. This may cause an accident. Excessive engine wear

may also result if idle speed is adjusted improperly or when the engine is

not fully warmed up. Adjust the idle to the correct speed. Make sure the

engine is fully warm before adjusting the engine idle speed.

Inspect the fuel hose for damage and

fuel leakage. If any defects are found,

the fuel hose must be replaced.

Fuel Hose

Idle Screw

adjustment

INSPECTION AND MAINTENANCE

Carburetor

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 81 82

No comments

Baja BA 250 Owner's Manual Page 56